Return to the VTRC Home Page
Click here to print the printer friendly version of this page.
Page Title: VTRC Report Detail

The contents of this report reflect the views of the author(s), who is responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the Virginia Department of Transportation, the Commonwealth Transportation Board, or the Federal Highway Administration. This report does not constitute a standard, specification, or regulation. Any inclusion of manufacturer names, trade names, or trademarks is for identification purposes only and is not to be considered an endorsement.


Evaluation of Modified Single Seal Surface Treatments
Payne, Charles W.
G. W. Maupin, Jr.
Year: 1995
VTRC No.: 95-R23
Abstract: This report describes a field study of a multicourse asphalt emulsion chip seal, designated as a modified single seal. The treatment, already used in North Carolina, consists of an application of emulsion and coarse aggregate followed by another application of emulsion and a final layer of fine aggregate. Sixty sections were placed in three districts in 1986-88, totaling approximately 400 lane-km of surfacing. These sections were evaluated periodically by a team of local operations personnel and research staff. The operations personnel also provided estimates of service life. for conventional single chip seals, used for a cost-benefit analysis. The modified seals performed better and were more cost-effective than conventional surface treatments. Also, the hazard of broken windshields caused by loose aggregate was virtually eliminated on the modified seal treatments. The report includes recommendations for ensuring that the final product is of high quality. The recommendations include using a pilot vehicle, limiting the speed of construction traffic, using clean dry blot aggregate, applying the coarse aggregate not more than one stone thick, and using the proper nozzles on the asphalt distributor.