Return to the VTRC Home Page
Click here to print the printer friendly version of this page.
 
Page Title: VTRC Report Detail

The contents of this report reflect the views of the author(s), who is responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the Virginia Department of Transportation, the Commonwealth Transportation Board, or the Federal Highway Administration. This report does not constitute a standard, specification, or regulation. Any inclusion of manufacturer names, trade names, or trademarks is for identification purposes only and is not to be considered an endorsement.

Title:

Evaluation of the In-service Performance of the Tom's Creek Bridge Fiber-reinforced Polymer Superstructure
Authors:
Neely, William Douglas.
Cousins, Thomas E.
Phifer, S. P.
Senne, J. L.
Case, S. W.
Lesko, John J.
Jose P. Gomez
Year: 2003
VTRC No.: 04-CR5
Abstract: The Tom's Creek Bridge is a small-scale demonstration project involving the use of fiber-reinforced polymer (FRP) composite girders as the main load carrying members. It is a simply supported, short-span bridge located along Tom's Creek Road in Blacksburg, Virginia. As a result of discussions among Virginia Tech, Strongwell, the Virginia Department of Transportation, and the Town of Blacksburg, the existing deteriorated superstructure of the Tom's Creek Bridge was replaced with a glue-laminated timber deck on 8 in (20.3 cm) deep pultruded fiber-reinforced polymer beams. The project was intended to address two issues. First, by calculating bridge design parameters such as the dynamic load allowance, transverse wheel load distribution and deflections under service loading, the Tom's Creek Bridge will aid in modifying current AASHTO bridge design standards for use with FRP composite materials. Second, by evaluating the FRP girders after being exposed to controlled laboratory and service conditions, the project will begin to answer questions about the long-term performance of these advanced composite material beams when used in bridge design. A dynamic load allowance, IM, of 0.90 is recommended for the Tom's Creek Bridge. This value is the largest average IM observed and is therefore conservative. This value is significantly higher than those set forth in the AASHTO standards of 0.33 (AASHTO, 1998) and 0.30 (AASHTO, 1996). It is recommended to use a value of L/425 (LRFD Specification) or L/500 (Standard Specification). This value is consistent with AASHTO deflection control criteria for an all timber bridge. It is recommended to use the AASHTO wheel load distribution factors for a glulam timber deck on steel stringer bridge. There is no indication of loss of FRP girder ultimate strength after 15 months of service. Given the low service loads (no more than 10% of the ultimate capacity) and traffic volume the fatigue life prediction model suggests that fatigue will not be a major concern during the life of service (10 to 15 years).